- Size:
- 10'W x 8'H
Why customers choose this product:
- Ten-Foot Backlit Wall Maximizes Visual Impact
- Glowing Graphics Outshine Neighbouring Booths
- SEG Fabric Delivers Flawless Frameless Look
- Aluminum Extrusion Supports Large Lit Spans
Hardware only for Backlit LED Light Box SEG Floor Display WALL Kit, 10'W x 8'H
#BL826
- 10' × 8' LED Wall Kit
- Hardware Only, Graphics Not Included
- Built-In LED Lights, Top/Bottom
- Fully Tool-Free Aluminum Assembly
- Includes 600D Polyester Carry Case
- Full Kit Available: LT826
| Qty. | Retail pricing (4c) | |
|---|---|---|
| 1 | $2,870.35 | |
| 2 | $2,726.82 | |
| 3 | $2,669.42 | |
| 5 | $2,583.32 | |
Notes:
0/255
Please email your artwork to our customer support at orders@fiel.com
- Quantity:
- 1
- Unit price:
- $0.00
- Product cost:
- $0.00
- Estimated Total:
- $0.00
Estimate Shipping
Enter your shipping destination below to receive an estimated shipping cost based on FIEL’s negotiated UPS and FedEx rates, with an additional 50% discount applied.
Important: Select Your Address From the Google Suggestions
As you enter your address, postal code or ZIP code, Google will display matching address options. Please select the correct populated address from the list to receive your subsidized shipping estimate.
Shipping Estimate Calculator
For the most accurate estimate:
- Enter the complete shipping destination.
- Select the matching address suggested by Google rather than manually leaving the typed address.
- Confirm the postal code or ZIP code before calculating your estimate.
- Shipping shown is an estimate and may vary based on the final order details and destination.
- Size:
- 10'W x 8'H
Why customers choose this product:
- Ten-Foot Backlit Wall Maximizes Visual Impact
- Glowing Graphics Outshine Neighbouring Booths
- SEG Fabric Delivers Flawless Frameless Look
- Aluminum Extrusion Supports Large Lit Spans
Downloads
Artwork Requirements
For the best print quality and fastest turnaround, please follow the artwork guidelines below when preparing and submitting your files.
Preparing Your Artwork
Providing production-ready artwork helps us process your order efficiently and ensures the best possible decorated result.
Preferred File Formats
Submit artwork in EPS, AI or PDF format whenever possible. High-resolution JPEG files may also be accepted for photographs and suitable raster artwork.
Vector Artwork
Vector line art is preferred. All fonts and text should be converted to outlines, curves or paths before submitting.
Image Resolution
Raster artwork should be supplied at approximately 150–300 DPI or higher and designed at 100% of the intended print size.
Colour Mode
Artwork submitted using RGB colours or HEX codes will be converted to CMYK for production. Colours may shift slightly during the conversion process.
If supplied artwork needs to be recreated or vectorized, artwork charges are $12.50(g) per hour, with a one-hour minimum. Any applicable artwork charges will be acknowledged before we proceed.
Before You Submit
A quick check before sending your files can help prevent delays during the proofing and production process.
- Convert all fonts and text to outlines, curves or paths.
- Make sure images are high resolution and suitable for the final print size.
- Supply artwork at 100% of the intended print size whenever possible.
- Use EPS, AI or PDF files for production-ready artwork.
- Include your company name and PO number when submitting artwork separately from your order.
Electronic Proofs
We provide an electronic proof so you can review the artwork before production begins.
Where to Send Your Files
Sending your order, artwork and requests to the correct department helps us respond and process your project as quickly as possible.
Orders & Purchase Orders
Send orders and purchase orders to:
Whenever possible, please include your artwork when submitting your order.
Artwork for Existing Orders
If artwork is being sent after your order has already been submitted, send it to both:
artdept@fiel.com
orders@fiel.com
Please include your company name and PO number.
Large Artwork Files
For files that are too large to email, you may send them using Dropbox, Google Drive or WeTransfer.
Sales & Product Inquiries
For product information, current pricing, inventory availability or general sales questions, please contact our sales team.
Ready to Submit Your Artwork?
Have your artwork and order information ready? Upload your files and our team will help move your project toward production.
Upload Artwork1-Year Product Hardware Warranty
FIEL provides a one-year parts and labor warranty on eligible product hardware against defects in material and workmanship.
This warranty applies only to products whose individual product page specifically links to or identifies the 1-Year Product Hardware Warranty.
Eligible Product Hardware
This warranty applies to eligible hardware used with the following FIEL product categories:
What Is Covered?
The standard warranty is a one-year parts and labor warranty covering defects in material and workmanship.
Products determined to be defective will be repaired or replaced at the factory's discretion.
What Is Not Covered?
This warranty does not cover damage resulting from:
- Accidents
- Abuse or misuse
- Normal wear and tear
Need Warranty Assistance?
If you believe your product hardware may have a warranty issue, contact FIEL with your order and product information so our team can assist you.
Contact FIEL
Open here
Backlit LED Light Box SEG Floor Display Wall Kit — Hardware Only, 10'W x 8'H
The illuminated SEG wall frame sized to a standard inline booth — ten feet of lit brand presence, with LED lighting built into the structure. Graphics are not included, making this the right order for teams who already hold SEG panels or intend to re-skin one frame show after show.
Ideal for 10' x 10' trade show booths, media walls, press conferences, interviews, photo and video backdrops, conference stages, retail feature walls, reception areas, and permanent office branding.
Built to the Standard Booth Width
Ten feet is the frontage of a standard inline exhibit space, so this wall fills your allotment corner to corner with one continuous lit graphic rather than two narrower banners with a gap between them.
Two of these frames also line up to form a 20-foot illuminated run if you upgrade to a double booth, which protects the investment as your show programme grows.
Backlighting Changes How Colour Reads
Built-in LEDs push light through the fabric from behind, so colours are transmitted rather than reflected. Saturated brand colours become luminous and dark areas hold their depth.
In a crowded hall where every neighbour has a printed backdrop, a lit ten-foot wall is what visitors notice first — and it keeps working under dim or uneven house lighting that flattens everything around it.
Silicone Edge Graphics, Seamless Finish
A silicone strip sewn into the panel edge tucks into the channel around the frame, concealing all hardware and graphic edges behind a flush, frameless printed face.
Because changing the graphic takes only minutes, one lit frame can serve a rotating calendar of shows and promotions at no further hardware cost. Need the frame and graphic together? The complete kit is available as LT826.
Tool-Free Assembly and Transport
The lightweight aluminum frame assembles fully tool-free despite the integrated lighting, so a ten-foot wall still goes up without hired labour — worth noting at venues where union install time is billable.
A soft carry case made from 600 denier polyester is included to protect the frame and LED components in transit and storage, which matters for a display with electronics inside.
Popular Uses
Trade shows, events, conferences, media walls, press conferences, interviews, photo backdrops, streaming and Zoom backgrounds, corporate events, weddings and party backdrops, retail displays, showrooms, reception areas, airports, and office branding.
Hardware only, including the LED-equipped frame and carry case. Graphics are not included and are sold separately.
- Size
- 10'W x 8'H
- Country of Manufacture
- China
- MOQ
- 1
- Setup Charge
- Free
- Carton Size
- 21"W x 7"H x 46"L
- Carton Weight
- 50 lbs
- Carton Quantity
- 1 pc
